SAMSUNG ARIABOX DVM S Heat Pump Air Conditioning System for Industrial Buildings - 10 HP

ARIABOX DVM S is the ideal system for air-conditioning industrial sheds as its indoor unit is able to reduce air stratification. Its most significant advantages are: high thermal comfort, optimal control of the ambient temperature, reduced energy consumption, completely cleanable.
€19,490.00

Availability: Out of stock

ARIABOX DVM S is a heat pump air conditioning system designed to meet the needs of heating, cooling and air treatment in large rooms and industrial buildings.

The air conditioner is a split-system type and uses the most advanced technologies combined with an internal unit capable of reversing the tendency of hot air to stratify upwards, avoiding unnecessary waste and optimizing comfort.

The outdoor unit combines high performance and low energy consumption and, thanks to the Inverter compressor and the gas injection system, is able to increase efficiency up to 25% with low external temperatures compared to traditional VRF systems. Moreover, this system guarantees heat pump operation even with an outdoor temperature of -25°C.

The advantages of the ARIABOX system are as follows:

  • extremely low air stratification;
  • high winter and summer thermal comfort;
  • optimal control of the ambient temperature;
  • reduced set-up times;
  • reduced noise;
  • installation speed;
  • reduced energy consumption;
  • completely washable and sanitizable.


In terms of consumption optimization, an ARIABOX system guarantees energy savings of 27.8% on energy consumption for heating compared to a traditional methane gas system.

The external unit, equipped with a Scroll Inverter compressor, guarantees energy efficiency (EER) and average seasonal efficiency (ESEER) values ​​of respectively 13% and 4% compared to the market average. Furthermore, the brazed plate heat exchanger (PHE) increases the exchange efficiency by 30% compared to the Shell & Tube models and by 50% compared to the double tube models. Furthermore, the card that controls the Invert on board the condensing unit is cooled using the refrigerant; in this way the cooling is more efficient than the classic natural convention.

ARIABOX DVM S is reliable even in the case of installations with long pipes and significant differences in height: thanks to the high quantity of oil and the low percentage of circulation, the system performs the oil recovery cycle in heating without having to reverse the cycle , maintaining the comfort inside the air-conditioned rooms.

Simplified management

The ARIABOX DVM S system is equipped with a self-diagnosis and self-start program that supervises the correctness of all operating parameters. Thanks to the WiFi system (optional), all operating data is stored and controlled directly on a smartphone or tablet. Thanks to the integrated self-starting system, the start-up time is reduced to just 50 minutes and the data is automatically archived. Finally, thanks to the self-diagnosis tool, the external unit monitors all operations and displays any operating errors, providing, in complete autonomy, the immediate resolution of the problem.

In case of error, however, the system keeps the record of the last 30 minutes of operation. The small inspection door, positioned on the front, allows easier maintenance and simplified system control.

Flexibility and high reliability

The fan of the outdoor unit has a high external static head of 78.45 Pa and therefore the machine can be installed in a technical room with a duct for expulsion of air and a grill for the recovery of outdoor air.

The ARIABOX DVM S outdoor unit is equipped with an innovative system capable of detecting the actual formation of ice on the battery: this avoids unnecessary defrosting. Compared to conventional systems, this system remains in heating mode for longer periods thus avoiding cycle inversions. This feature allows a considerable energy saving and guarantees an unchanged comfort in the environments.

During the winter season, snow may accumulate on the outdoor unit causing inevitable problems with correct operation. The "snow removal" function maximizes ventilation every 30 minutes preventing the accumulation of snow (with outside temperatures below 5°C).

Finally, through a setting on the electronic board (or through the DMS 2 web server) it is possible to reduce the absorption of the external motor up to 50% to control the peak power: the power reduction can be set to 11 different levels.

Possibility of channeling

The evaporating unit is designed for ducting. It can be connected to micro or macro induction channels, textile fiber channels, steel channels or sandwich panels designed and customized for every environment and need.

More Information
Max. Indoor Units 0

Our staff is qualified and experienced and it has all the necessary equipment to design and install any air conditioning systems to perfection.

Our technicians are in fact equipped with refrigeration license, as required by law, and perform regular refresher courses directly from the parent companies; therefore they are familiar with all the characteristics of the products sold on Shopclima.it in order to provide professional, qualified and guaranteed technical support.

Please feel free to contact us for more information or a customized quote.

Elettrodomex Srl guarantees the good quality of the products for sale on Elettrodomex.it and it is responsible to the consumer for any lack of conformity existing at the time of delivery of the goods. Elettrodomex Srl undertakes, during the warranty period specified below, to repair (at its warehouse) or replace as soon as possible those parts or products that prove defective, provided that this does not depend on breakages or failures caused by incompetence or negligence of the customer, lack of maintenance, use outside the technical specifications or purposes of use, fortuitous events or major force.

The warranty period is 24 months from the invoice date (12 months for professional buyers and users), therefore any lack of conformity must be reported within 24 months after the date of purchase (12 months for professional buyers and users). The time limit within which the defect of the product must be communicated from the moment it is manifested is 2 months.

The lack of conformity can be found for malfunction, manufacturing defect, discrepancy between what was sold and what was received by the Customer 

The warranty will apply to products that show conformity defects or faults not found or found at the time of purchase, provided they have been used correctly and in compliance with their destination and as required by any technical documents. The warranty will not be applied in case of negligence and carelessness from the customer, as well as mechanical or electronic changes not prescribed by the manufacturer.

For any further information regarding our order guarantees, contact us.